1756-EN2TR ALLEN-BRALEY PLC

In Stock

11 Products Left

$189869

$113921

40% OFF

able 4 - Technical Specifications - 1756 EtherNet/IP Modules(1) (1) Includes the K conformal coating catalog numbers. Attribute 1756-EN2F/B 1756-EN2F/C 1756-EN2T/D
1756-EN2TP/A 1756-EN2TR/C
1756-EN3TR/B 1756-EN4TR/A 1756-ENBT/A EtherNet/IP communication rate 100 Mbps
no auto-negotiation 10/100 Mbps 10/100 Mbps 1 Gbps 10/100 Mbps Current draw @ 5.1V DC 1.2 A 1 A 1.2 A 700 mA Current draw @ 24V DC 3 mA Power dissipation 6.2 W 5.1 W 6.12 W 3.7 W Thermal dissipation 21.28 BTU/hr 17.4 BTU/hr 20.9BTU/Hr 12.6 BTU/hr Isolation voltage 30V (continuous)
basic insulation type
USB to backplane Type tested at 980V AC for 60 s 30V (continuous)
basic insulation type
Ethernet to backplane
USB to Backplane
and USB to Ethernet(2) Type tested at 980V AC for 60 s (2) Applies only to these modules/series	1756-EN2T/D
1756-EN2TR/C
1756-EN3TR/B. 30V (continuous)
basic insulation type
Ethernet to backplane
USB to backplane
and USB to Ethernet Type tested at 860V AC for 60 s 30V (continuous)
basic insulation type
Ethernet network to backplane Type tested @ 707V DC for 60 s Slot width 1 Module location Chassis-based
any slot Chassis 1756-A4
1756-A7
1756-A10
1756-A13
1756-A17 Power supply
standard 1756-PA72
1756-PA75
1756-PB72
1756-PB75
1756-PC75
1756-PH75 Power supply
redundant 1756-PA75R
1756-PB75R
1756-PSCA2 Ethernet port 1 Ethernet fiber 1 Ethernet RJ45 Category 5 2 Ethernet RJ45 Category 5 2 Ethernet RJ45 Category 5E 1 Ethernet RJ45 Category 5 Ethernet cable Multimode fiber
LC connector 802.3 compliant shielded or unshielded twisted-pair USB port(3) (3) The USB port is intended for temporary local programming purposes only and not intended for permanent connection. Do not use the USB port in hazardous locations. USB full speed (12 Mbps) — Wiring category (4) (4) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines
publication 1770-4.1. 3 - on USB ports 2 - on Ethernet ports 3 - on USB ports 2 - on Ethernet ports North American temp code T4A ATEX temp code T4 IECEx temp code T4 Enclosure type rating None (open-style) Transmitter launch power at Beginning of Life (BOL)
min Allow -1 dB at End of Life (EOL) -19 dBm into 62.5/125 ?m fiber
— = 0.275 -22.5 dBm into 50/125 ?m fiber
— = 0.20 —

able 4 - Technical Specifications - 1756 EtherNet/IP Modules(1) (1) Includes the K conformal coating catalog numbers. Attribute 1756-EN2F/B 1756-EN2F/C 1756-EN2T/D

1756-EN2TP/A 1756-EN2TR/C

1756-EN3TR/B 1756-EN4TR/A 1756-ENBT/A EtherNet/IP communication rate 100 Mbps

no auto-negotiation 10/100 Mbps 10/100 Mbps 1 Gbps 10/100 Mbps Current draw @ 5.1V DC 1.2 A 1 A 1.2 A 700 mA Current draw @ 24V DC 3 mA Power dissipation 6.2 W 5.1 W 6.12 W 3.7 W Thermal dissipation 21.28 BTU/hr 17.4 BTU/hr 20.9BTU/Hr 12.6 BTU/hr Isolation voltage 30V (continuous)

basic insulation type

USB to backplane Type tested at 980V AC for 60 s 30V (continuous)

basic insulation type

Ethernet to backplane

USB to Backplane

and USB to Ethernet(2) Type tested at 980V AC for 60 s (2) Applies only to these modules/series

1756-EN2T/D

1756-EN2TR/C

1756-EN3TR/B. 30V (continuous)

basic insulation type

Ethernet to backplane

USB to backplane

and USB to Ethernet Type tested at 860V AC for 60 s 30V (continuous)

basic insulation type

Ethernet network to backplane Type tested @ 707V DC for 60 s Slot width 1 Module location Chassis-based

any slot Chassis 1756-A4

1756-A7

1756-A10

1756-A13

1756-A17 Power supply

standard 1756-PA72

1756-PA75

1756-PB72

1756-PB75

1756-PC75

1756-PH75 Power supply

redundant 1756-PA75R

1756-PB75R

1756-PSCA2 Ethernet port 1 Ethernet fiber 1 Ethernet RJ45 Category 5 2 Ethernet RJ45 Category 5 2 Ethernet RJ45 Category 5E 1 Ethernet RJ45 Category 5 Ethernet cable Multimode fiber

LC connector 802.3 compliant shielded or unshielded twisted-pair USB port(3) (3) The USB port is intended for temporary local programming purposes only and not intended for permanent connection. Do not use the USB port in hazardous locations. USB full speed (12 Mbps) — Wiring category (4) (4) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines

publication 1770-4.1. 3 - on USB ports 2 - on Ethernet ports 3 - on USB ports 2 - on Ethernet ports North American temp code T4A ATEX temp code T4 IECEx temp code T4 Enclosure type rating None (open-style) Transmitter launch power at Beginning of Life (BOL)

min Allow -1 dB at End of Life (EOL) -19 dBm into 62.5/125 ?m fiber

— = 0.275 -22.5 dBm into 50/125 ?m fiber

— = 0.20 —

Graven Automation Pvt Ltd