LXM28EU04M3X SCHNEIDER DRIVE

Main Range of Product Lexium 28 Device short name LXM28E Product or Component Type Motion servo drive Format of the drive Compact housing Line current 3.8 A 211.6 % 220 V
single phase 3.8 A 183.7 % 220 V
three phase Complementary Phase Three phase Single phase [Us] rated supply voltage 200...240 V - 10...15 %)three phase 200...240 V - 20...15 %)single phase Supply voltage limits 200…255 V three phase 170…255 V single phase Supply frequency 50/60 Hz - 5...5 % Network Frequency 47.5...63 Hz EMC filter Without EMC filter Continuous output current 2.6 A 16 kHz Output current 3s peak 7.8 A 220 V Continuous power 400 W 220 V Nominal power 0.4 kW 220 V 16 kHz Switching frequency 16 kHz Overvoltage category III Maximum leakage current 1.3 mA Output voltage <= power supply voltage Electrical isolation Between power and control Type of cable Shielded motor cable 32…131 °F (0…55 °C)) copper Electrical connection Spring terminal 0.82...1 mm²
AWG 18 L1-L2) Spring terminal 0.82...1 mm²
AWG 18 R
S
T) Spring terminal 0.82...1 mm²
AWG 18 U
V
W
PE) Spring terminal 0.82...1 mm²
AWG 18 PA/+
PBe) Discrete input number 8 programmable CN1) 2 fast capture CN1) 1 safety function STO CN9) Discrete input voltage 24 V DC logic Discrete input logic Positive or negative CN1) Discrete output number 5 logic output CN1)12...24 V DC 1 pulse train output (PTO) CN1) Discrete output voltage 12...24 V DC Discrete output logic Positive or negative CN1) Control signal type Servo motor encoder feedback CN2 Protection type Against reverse polarity inputs signal Against short-circuits outputs signal Overcurrent motor Overvoltage motor Undervoltage motor Overheating motor Overload motor Overspeed motor Safety function STO (safe torque off)
Integrated Safety level SIL 2 IEC 61800-5-2 2007 SIL 2 IEC 61508-1 2010 PL d/category 3 ISO 13849-1 2008 SIL 2 ISO 13849-1 2009/AC SIL 2 IEC 60204-1 2006 SIL 2 IEC 60204-1 2009/A1 SIL 2 IEC 60204-1 2010/AC SIL 2 IEC 62061 2012 Communication interface EtherCAT
Integrated Connector type RJ45 CN4)EtherCAT Method of access Slave Transmission rate 100 Mbit/s EtherCAT Physical interface RS485 Modbus Serial line slave Status LED 1 LED (Red) DC bus energized 1 LED (multi-colour) N.RUN 1 LED (multi-colour) N.ERR 2 LEDs (Green) Link (Link Status) 2 LEDs (Yellow) activity Signalling function Servo status and fault codes five 7-segment display units Marking CE CULus type of cooling Fan Operating position Vertical Product compatibility Servo motor BCH2 2.4 in (60 mm)
2 400 W Servo motor 3.1 in (80 mm)
1 400 W Servo motor 5.1 in (130 mm)
1 300 W Width 2.2 in (55 mm) Height 5.9 in (150 mm) Depth 5.7 in (146 mm) Net Weight 2.2 lb(US) (1 kg) Supply voltage description Three phase 220 V AC 50...60 Hz Single phase 220 V AC 50...60 Hz Network number of phases 1 3 Drive voltage drop coefficient 1 Field weakening False Continuous output current 2 2.6 A Output current 3s peak 2 7.8 A 220 V Switching frequency 2 16 kHz Continuous output current 3 2.6 A Output current 3s peak 3 7.8 A 220 V Switching frequency 3 16 kHz communication interface Pulse train output EtherCAT Emc filter compatibility Type 020 Type 022 Environment Electromagnetic compatibility Conducted emission - test level	level 3 category C3 conforming to IEC 61800-3 Standards IEC 61800-5-1 Product Certifications CE CSA cULus IP degree of protection IP20 Vibration resistance 3M4 3 mm 9…200 Hz)IEC 60721-3-3 Shock resistance 10 gn
type I IEC 60721-3-3 Relative humidity 5…95 % without condensation Ambient air temperature for operation 32…131 °F (0…55 °C) Ambient Air Temperature for Storage -13…149 °F (-25…65 °C) Operating altitude <= 3280.84 ft (1000 m) without derating > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m Ordering and shipping details Category US1PC5118262 Discount Schedule PC51 GTIN 3606481167279 Returnability No Country of origin CN Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 2.95 in (7.500 cm) Package 1 Width 9.06 in (23.000 cm) Package 1 Length 9.33 in (23.700 cm) Package 1 Weight 2.888 lb(US) (1.310 kg) Unit Type of Package 2 S03 Number of Units in Package 2 5 Package 2 Height 11.81 in (30.000 cm) Package 2 Width 11.81 in (30.000 cm) Package 2 Length 15.75 in (40.000 cm) Package 2 Weight 15.653 lb(US) (7.100 kg)

This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated EtherCAT interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase/single phase), an output current of 2.6A, nominal power of 400W and continuous power of 400W. It is furnished with spring terminal electrical connection and RJ45 connectors (CN4) for EtherCAT. There is an electrical isolation between power and control. It offers EtherCAT communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 146mm (depth) x 150mm (height). It weighs 1kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (60mm, 2 motor stacks) at 400W and servo motor (130mm, 1 motor stack) at 300W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines. Specifications

Login

LXM28EU04M3X SCHNEIDER DRIVE

0%

0%

0%

0%

0%

Graven Automation Pvt Ltd