AI801 ABB PLC

In Stock

HURRY UP! Only 10 Products Left

$73603

$44161

40% OFF

General info Article number 3BSE020512R1 Type Analog Input Signal specification 0...20 mA
4...20 mA Number of channels 8 Signal type Unipolar single ended HART No SOE No Redundancy No High integrity No Intrinsic safety No Mechanics S800L Detailed data Resolution 12 bit Input impedance 230 - 275 k? (current input incl PTC) Isolation Groupwise isolated from ground Under/over range 0% / +15% Error Max 0
1% Temperature drift Typ. 50 ppm/°C
Max. 80 ppm/°C Input filter (rise time 0-90%) 180 ms Update cycle time 1 ms Maximum field cable length 600 meters (656 yards) Max input voltage (non destructive) 30 V d.c. NMRR
50Hz
60Hz > 40dB Rated insulation voltage 50 V Dielectric test voltage 500 V a.c. Power dissipation 1.1 W Current consumption +5 V Modulebus 70 mA Current consumption +24 V Modulebus 0 Current consumption +24 V external 30 mA Supported wire size Solid	0.05-2.5 mm²
30-12 AWG Stranded	0.05-1.5 mm²
30-12 AWG Recommended torque	0.5-0.6 Nm Stripping length 6-7.5mm
0.24-0.30 inch Diagnostics Front LED’s S(tatus) (run or fault) Status indication of supervision Module Error
Module Warning
Channel error Environment and certification CE mark Yes Electrical safety EN 61010-1
UL 61010-1
EN 61010-2-201
UL 61010-2-201 Hazardous Location C1 Div 2 cULus
C1 Zone 2 cULus
ATEX Zone 2 Marine certification ABS
BV
DNV
LR Temperature
Operating 0 to +55 °C (+32 to +131 °F)
approvals are issued for +5 to +55 °C Temperature
Storage -40 to +70 °C (-40 to +158 °F) Pollution degree Degree 2
IEC 60664-1 Corrosion protection ISA-S71.04	G3 Relative humidity 5 to 95 %
non-condensing Max ambient temperature 55 °C (131 °F)
for vertical mounting 40 °C (104 °F) Protection class IP20 according to IEC 60529 Mechanical operating conditions IEC 61131-2 EMC EN 61000-6-4 and EN 61000-6-2 Overvoltage categories IEC/EN 60664-1 Equipment class Class I according to IEC 61140; (earth protected) RoHS compliance DIRECTIVE/2011/65/EU (EN 50581	2012) WEEE compliance DIRECTIVE/2012/19/EU Dimensions Width 86.1 mm (3.4”) Depth 58.5 mm (2.3”) Height 110 mm (4.33”) Weight 0.24 kg (0.53 lbs.)

General info Article number 3BSE020512R1 Type Analog Input Signal specification 0...20 mA

4...20 mA Number of channels 8 Signal type Unipolar single ended HART No SOE No Redundancy No High integrity No Intrinsic safety No Mechanics S800L Detailed data Resolution 12 bit Input impedance 230 - 275 k? (current input incl PTC) Isolation Groupwise isolated from ground Under/over range 0% / +15% Error Max 0

1% Temperature drift Typ. 50 ppm/°C

Max. 80 ppm/°C Input filter (rise time 0-90%) 180 ms Update cycle time 1 ms Maximum field cable length 600 meters (656 yards) Max input voltage (non destructive) 30 V d.c. NMRR

50Hz

60Hz > 40dB Rated insulation voltage 50 V Dielectric test voltage 500 V a.c. Power dissipation 1.1 W Current consumption +5 V Modulebus 70 mA Current consumption +24 V Modulebus 0 Current consumption +24 V external 30 mA Supported wire size Solid

0.05-2.5 mm²

30-12 AWG Stranded

0.05-1.5 mm²

30-12 AWG Recommended torque

0.5-0.6 Nm Stripping length 6-7.5mm

0.24-0.30 inch Diagnostics Front LED’s S(tatus) (run or fault) Status indication of supervision Module Error

Module Warning

Channel error Environment and certification CE mark Yes Electrical safety EN 61010-1

UL 61010-1

EN 61010-2-201

UL 61010-2-201 Hazardous Location C1 Div 2 cULus

C1 Zone 2 cULus

ATEX Zone 2 Marine certification ABS

DNV

LR Temperature

Operating 0 to +55 °C (+32 to +131 °F)

approvals are issued for +5 to +55 °C Temperature

Storage -40 to +70 °C (-40 to +158 °F) Pollution degree Degree 2

IEC 60664-1 Corrosion protection ISA-S71.04

G3 Relative humidity 5 to 95 %

non-condensing Max ambient temperature 55 °C (131 °F)

for vertical mounting 40 °C (104 °F) Protection class IP20 according to IEC 60529 Mechanical operating conditions IEC 61131-2 EMC EN 61000-6-4 and EN 61000-6-2 Overvoltage categories IEC/EN 60664-1 Equipment class Class I according to IEC 61140; (earth protected) RoHS compliance DIRECTIVE/2011/65/EU (EN 50581

2012) WEEE compliance DIRECTIVE/2012/19/EU Dimensions Width 86.1 mm (3.4”) Depth 58.5 mm (2.3”) Height 110 mm (4.33”) Weight 0.24 kg (0.53 lbs.)

Graven Automation Pvt Ltd