E6F-AB5C-C OMRON SENSOR

In Stock

HURRY UP! Only 10 Products Left

$89263

$53557

40% OFF

1

Description Specification Reviews
     

0%

    0
     

0%

    0
     

0%

    0
     

0%

    0
     

0%

    0

Write Review


NO REVIEWS YET!

Power supply voltage 5 VDC -5% to 12 VDC +10%
ripple (p-p) 5% max. 12 VDC -10% to 24 VDC +15%
ripple (p-p) 5% max. Current consumption *1 60 mA max. Resolution (pulses/rotation) *2 360 Output code BCD Output configuration NPN open-collector output PNP open-collector output Output capacity Applied voltage
low = 1) Positive logic (high = 1
low = 0) Direction of rotation Output code incremented by CW (as viewed from the end of the shaft) Rise and fall times of output 1 ?s max. (E6F-AB3C
A[]5C Load voltage
Load resistance 1 k?
Output cable 2 m max.; E6F-A[]5B
Load resistance 1 k?
Output cable 2 m max.) Starting torque 9.8 mNm max. at room temperature
14.7 mNm max. at low temperature Moment of inertia 1.5 × 10-6 kgm2 max. Shaft loading Radial 120 N Thrust 50 N Maximum permissible speed 5000 r/min Ambient temperature range Operating -10 to 70°C (with no icing)
Storage -25 to 80°C (with no icing) Ambient humidity range Operating
Storage 35% to 95% (with no condensation) Insulation resistance 20 M? min. (at 500 VDC) between current-carrying parts and case Dielectric strength 500 VAC
50/60 Hz for 1 min between current-carrying parts and case Vibration resistance 10 to 500 Hz
2-mm double amplitude for 11 min 3 times each in X
Y
and Z directions Shock resistance Destruction 1
000 m/s2 3 times each in X
Y
and Z directions Degree of protection IEC 60529 IP65
in-house standards oilproof Connection method Connector Models (Standard cable length
Main unit Aluminum
Shaft SUS420J2
Mounting Bracket Galvanized iron Weight (packed state) Approx. 500 g Accessories Servo Mounting Bracket
Coupling (provided with Pre-wired Models only)
Hexagonal wrench (provided with Pre-wired Models only)
Instruction manual Model E6F-AG5C-C E6F-AG5C E6F-AG5B Power supply voltage 12 VDC -10% to 24 VDC +15%
ripple (p-p) 5% max. Current consumption *1 60 mA max. Resolution (pulses/rotation) *2 256
360
720 256
360
720
1024 Output code Gray code Output configuration NPN open-collector output PNP open-collector output Output capacity Applied voltage 30 VDC max. Sink current
low = 1) Positive logic (high = 1
low = 0) Direction of rotation Output code incremented by CW (as viewed from the end of the shaft) Rise and fall times of output 1 ?s max. (E6F-AB3C
A[]5C Load voltage
Load resistance 1 k?
Output cable 2 m max.; E6F-A[]5B
Load resistance 1 k?
Output cable 2 m max.) Starting torque 9.8 mNm max. at room temperature
14.7 mNm max. at low temperature Moment of inertia 1.5 × 10-6 kgm2 max. Shaft loading Radial 120 N Thrust 50 N Maximum permissible speed 5000 r/min Ambient temperature range Operating -10 to 70°C (with no icing)
Storage -25 to 80°C (with no icing) Ambient humidity range Operating
Storage 35% to 95% (with no condensation) Insulation resistance 20 M? min. (at 500 VDC) between current-carrying parts and case Dielectric strength 500 VAC
50/60 Hz for 1 min between current-carrying parts and case Vibration resistance 10 to 500 Hz
2-mm double amplitude for 11 min 3 times each in X
Y
and Z directions Shock resistance Destruction 1
000 m/s2 3 times each in X
Y
and Z directions Degree of protection IEC 60529 IP65
in-house standards oilproof Connection method Connector Models (Standard cable length
Main unit Aluminum
Shaft SUS420J2
Mounting Bracket Galvanized iron Weight (packed state) Approx. 500 g Accessories Servo Mounting Bracket
Coupling (provided with Pre-wired Models only)
Hexagonal wrench (provided with Pre-wired Models only)
Instruction manual *1. An inrush current of approximately 9 A will flow for approximately 5 ?s when the power is turned ON. *2. The code is as follows Output code Resolution Code No. BCD 360 0 to 359 Gray code 256 0 to 255 360 76 to 435 (gray after 76) 720 152 to 871 (gray after 152) 1024 0 to 1023

• Absolute model. • External diameter of 60 mm. • Resolution of up to 1,024 (10-bit). • IP65 oil-proof protection. • Strong shaft. ?Radial: 120 N, Thrust: 50 N

More FROM    

Graven Automation Pvt Ltd