DI801 ABB PLC

In Stock

HURRY UP! Only 10 Products Left

$33582

$20149

40% OFF

General info Article number 3BSE020508R1 Type Digital Input Signal specification 24V d.c. Number of channels 16 Signal type Current sinking HART No SOE No Redundancy No High integrity No Intrinsic safety No Mechanics S800L Detailed data Input voltage range
"0" -30 .. +5 V Input voltage range
"1" 15 .. 30 V Input impedance 3.5 k? Isolation Groupwise isolated from ground Filter times (digital
selectable) 2
4
8
16 ms Maximum field cable length 600 meters (656 yards) Rated insulation voltage 50 V Dielectric test voltage 500 V Power dissipation Typ 2.2 W Current consumption +5 V Modulebus 70 mA Current consumption +24 V Modulebus 0 Supported wire size Solid	0.05-2.5 mm²
30-12 AWG Stranded	0.05-1.5 mm²
30-12 AWG Recommended torque	0.5-0.6 Nm Stripping length 6-7.5mm
0.24-0.30 inch Diagnostics Front LED’s S(tatus) (run or fault)
Channel 1-16 ("0" or "1") Supervision Process voltage supervision on channel 16 Status indication of supervision Module Error
Module Warning
Channel Error Environment and certification CE mark Yes Electrical safety EN 61010-1
UL 61010-1
EN 61010-2-201
UL 61010-2-201 Hazardous Location C1 Div 2 cULus
C1 Zone 2 cULus
ATEX Zone 2 Marine certification ABS
BV
DNV
LR Temperature
Operating 0 to +55 °C (+32 to +131 °F)
approvals are issued for +5 to +55 °C Temperature
Storage -40 to +70 °C (-40 to +158 °F) Pollution degree Degree 2
IEC 60664-1 Corrosion protection ISA-S71.04	G3 Relative humidity 5 to 95 %
non-condensing Max ambient temperature 55 °C (131 °F)
for vertical mounting 40 °C (104 °F) Protection class IP20 according to IEC 60529 Mechanical operating conditions IEC/EN 61131-2 EMC EN 61000-6-4 and EN 61000-6-2 Overvoltage categories IEC/EN 60664-1
EN 50178 Equipment class Class I according to IEC 61140; (earth protected) RoHS compliance DIRECTIVE/2011/65/EN (EN 50581	2012) WEEE compliance DIRECTIVE/2012/19/EU Dimensions Width 86.1 mm (3.4”) Depth 58.5 mm (2.3”) Height 110 mm (4.33”) Weight 0.24 kg (0.53 lbs.)

General info Article number 3BSE020508R1 Type Digital Input Signal specification 24V d.c. Number of channels 16 Signal type Current sinking HART No SOE No Redundancy No High integrity No Intrinsic safety No Mechanics S800L Detailed data Input voltage range

"0" -30 .. +5 V Input voltage range

"1" 15 .. 30 V Input impedance 3.5 k? Isolation Groupwise isolated from ground Filter times (digital

selectable) 2

16 ms Maximum field cable length 600 meters (656 yards) Rated insulation voltage 50 V Dielectric test voltage 500 V Power dissipation Typ 2.2 W Current consumption +5 V Modulebus 70 mA Current consumption +24 V Modulebus 0 Supported wire size Solid

0.05-2.5 mm²

30-12 AWG Stranded

0.05-1.5 mm²

30-12 AWG Recommended torque

0.5-0.6 Nm Stripping length 6-7.5mm

0.24-0.30 inch Diagnostics Front LED’s S(tatus) (run or fault)

Channel 1-16 ("0" or "1") Supervision Process voltage supervision on channel 16 Status indication of supervision Module Error

Module Warning

Channel Error Environment and certification CE mark Yes Electrical safety EN 61010-1

UL 61010-1

EN 61010-2-201

UL 61010-2-201 Hazardous Location C1 Div 2 cULus

C1 Zone 2 cULus

ATEX Zone 2 Marine certification ABS

DNV

LR Temperature

Operating 0 to +55 °C (+32 to +131 °F)

approvals are issued for +5 to +55 °C Temperature

Storage -40 to +70 °C (-40 to +158 °F) Pollution degree Degree 2

IEC 60664-1 Corrosion protection ISA-S71.04

G3 Relative humidity 5 to 95 %

non-condensing Max ambient temperature 55 °C (131 °F)

for vertical mounting 40 °C (104 °F) Protection class IP20 according to IEC 60529 Mechanical operating conditions IEC/EN 61131-2 EMC EN 61000-6-4 and EN 61000-6-2 Overvoltage categories IEC/EN 60664-1

EN 50178 Equipment class Class I according to IEC 61140; (earth protected) RoHS compliance DIRECTIVE/2011/65/EN (EN 50581

2012) WEEE compliance DIRECTIVE/2012/19/EU Dimensions Width 86.1 mm (3.4”) Depth 58.5 mm (2.3”) Height 110 mm (4.33”) Weight 0.24 kg (0.53 lbs.)

Graven Automation Pvt Ltd