LXM28AU10M3X

Range of product Lexium 28 Device short name LXM28A Product or component type Motion servo drive Format of the drive Compact housing Line current 8.5 A 176.3 % at 220 V
single phase 8.5 A 155.5 % at 220 V
three phase Complementary Network number of phases Single phase Three phase [Us] rated supply voltage 200...240 V (- 10...15 %) for three phase 200...240 V (- 20...15 %) for single phase Supply voltage limits 200…255 V three phase 170…255 V single phase Supply frequency 50/60 Hz - 5...5 % Network frequency 47.5...63 Hz EMC filter Without EMC filter Continuous output current 7 A at 16 kHz Output current 3s peak 21 A at 220 V Continuous power 1000 W at 220 V Nominal power 1 kW at 220 V 16 kHz Switching frequency 16 kHz Overvoltage category III Maximum leakage current 4.5 mA Output voltage <= power supply voltage Electrical isolation Between power and control Type of cable Shielded motor cable (temperature	0…55 °C) copper Electrical connection Spring terminal
clamping capacity	1.3...1.5 mm²
AWG 16 (L1-L2) Spring terminal
clamping capacity	1.3...1.5 mm²
AWG 16 (R
S
T) Spring terminal
clamping capacity	1.3...1.5 mm²
AWG 16 (U
V
W
PE) Spring terminal
clamping capacity	1.3...1.5 mm²
AWG 16 (PA/+
PBe) Discrete input number 8 programmable (CN1) 1 pulse train input (PTI) (CN1) 2 fast capture (CN1) 1 safety function STO (CN9) Discrete input voltage 24 V DC for logic Discrete input logic Positive or negative (CN1) Discrete output number 5 logic output (CN1) at 12...24 V DC 1 pulse train output (PTO) (CN1) Discrete output voltage 12...24 V DC Discrete output logic Positive or negative (CN1) Analogue input number 2 Absolute accuracy error 0.1 % Analogue input type V_REF voltage analog input	- 10...10 V
impedance	10 kOhm
resolution	14 bits T_REF voltage analog input Control signal type Servo motor encoder feedback CN2 Protection type Against reverse polarity
integrated Safety level SIL 2 conforming to IEC 61800-5-2	2007 SIL 2 conforming to IEC 61508-1
integrated CANmotion
integrated Connector type RJ45 (CN4) for CANopen
CANmotion Method of access Slave Transmission rate 250 kbit/s for bus length of 100…250 m for CANopen
CANmotion 500 kbit/s for bus length of 4…100 m for CANopen
CANmotion 1 Mbit/s for bus length of 4 m for CANopen
CANmotion Number of addresses 1…127 for CANopen
CANmotion Physical interface RS485 for Modbus Serial line slave Status LED 1 LED (red) charge 1 LED (green) RUN 1 LED (red) error Signalling function Servo status and fault codes five 7-segment display units Marking CE CULus CSA type of cooling Integrated fan Operating position Vertical Product compatibility Servo motor BCH2 (130 mm
1 motor stacks) at 1000 W Servo motor BCH2 (100 mm
1 motor stacks) at 1000 W Servo motor BCH2 (130 mm
2 motor stacks) at 900 W Servo motor BCH2 (130 mm
4 motor stacks) at 850 W Width 55 mm Height 150 mm Depth 170 mm Product weight 1.2 kg Supply voltage description Three phase 220 V AC 50...60 Hz Single phase 220 V AC 50...60 Hz Network number of phases 3 1 Drive voltage drop coefficient 1 Field weakening False Continuous output current 2 7 A Output current 3s peak 2 21 A at 220 V Switching frequency 2 16 kHz Continuous output current 3 7 A Output current 3s peak 3 21 A at 220 V Switching frequency 3 16 kHz communication interface CANmotion Pulse train output CANopen DS402 Pulse train input Emc filter compatibility Type 021 Type 022 Environment Electromagnetic compatibility Conducted emission - test level	level 3 category C3 conforming to IEC 61800-3 Standards IEC 61800-5-1 Product certifications CE CSA cULus IP degree of protection IP20 Vibration resistance 3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3 Shock resistance 10 gn
type I conforming to IEC 60721-3-3 Relative humidity 5…95 % without condensation Ambient air temperature for operation 0…55 °C Ambient air temperature for storage -25…65 °C Operating altitude <= 1000 m without derating > 1000...2000 m 1 % per 100 m Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 7.500 cm Package 1 Width 23.000 cm Package 1 Length 23.500 cm Package 1 Weight 1.499 kg Unit Type of Package 2 S03 Number of Units in Package 2 5 Package 2 Height 30.000 cm Package 2 Width 30.000 cm Package 2 Length 40.000 cm Package 2 Weight 7.990 kg

This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (single and three phase), an output current of 7A, nominal power of 1kW and continuous power of 1000W. It is furnished with spring terminal for electrical connection and RJ45 connectors (CN4) for CANopen/CAN motion. There is an electrical isolation between power/control. It offers CANopen and CAN motion communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 170mm (depth) x 150mm (height). It weighs 1.2kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 1 motor stack) at 1000W and servo motor BCH2 (100mm, 1 motor stack) at 1000W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

Login

LXM28AU10M3X

0%

0%

0%

0%

0%

Graven Automation Pvt Ltd