TM200C40R SCHNEIDER ELECTRIC PLC

Range of product Easy Modicon M200 Product or component type Logic controller [Us] rated supply voltage 100...240 V AC Discrete I/O number 40 Discrete input number I2...I5	4 fast input I0
I1
I6
I7	4 high speed input I8...I23
I0
I1
I6
I7 terminal(s) for high speed input 5 µs turn-on
I0
I1
I6
I7 terminal(s) for high speed input 100 µs turn-off
I2...I5 terminal(s) for fast input 35 µs turn-on
I2...I5 terminal(s) for fast input 100 µs turn-off
I8...I13 terminal(s) for regular input 35 µs turn-on
I8...I13 terminal(s) for regular input 10 ms turn-off
Q0...Q15 terminal(s) for relay output 10 ms turn-on
Q0...Q15 terminal(s) for relay output 125 µs turn-off
I14...I23 terminal(s) for regular input 55 µs turn-on
I14...I23 terminal(s) for regular input Configurable filtering time 0 ms for input 3 ms for input 12 ms for input Output voltage limits 30 V DC 250 V AC Maximum current per output common 4 A at COM 2 4 A at COM 0 4 A at COM 1 4 A at COM 3 Electrical durability 100000 cycles AC-12
240 V
480 VA
resistive 100000 cycles DC-12
24 V
48 W
resistive Switching frequency 0.1 Hz with maximum load Mechanical durability 20000000 cycles for relay output Minimum load 10 mA at 5 V DC for relay output Memory capacity 512 byte internal flash for backup of programs Data storage equipment 32 GB micro SD card (optional) Battery type BR2032 Li-CFx (Lithium-Carbon Monofluoride)
battery life	5 year(s) Backup time 3 years at 25 °C (by interruption of power supply) Execution time for 1 KInstruction 0.3 ms for event and periodic task Execution time per instruction 0.2 µs Boolean Exct time for event task 60 µs response time Clock drift <= 90 s/month at 25 °C Regulation loop Adjustable PID regulator up to 14 simultaneous loops Control signal type Quadrature (x1
x2
x4) at 100 kHz for fast input (HSC mode) Pulse/direction at 100 kHz for fast input (HSC mode) Single phase at 100 kHz for fast input (HSC mode) CW/CCW at 100 kHz for fast input (HSC mode) Counting input number 4 fast input (HSC mode) at 100 kHz 32 bits Integrated connection type USB port with mini B USB 2.0 connector Non isolated serial link serial 1 with terminal block connector and RS485 interface Non isolated serial link serial 2 with terminal block connector and RS232/RS485 interface Isolated serial link serial 2 with terminal block connector and RS485 interface Transmission rate 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 12 Mbit/s for USB Communication port protocol USB port	USB - SoMachine-Network Non isolated serial link
4 terminal(s) for connecting the serial link1 removable screw terminal block
3 terminal(s) for connecting the 100-240 V AC power supply Maximum cable distance between devices Unshielded cable	<50 m for input Shielded cable
without condensation (in operation) 10…95 %
without condensation (in storage) Ambient air temperature for operation 0…55 °C (horizontal installation) Ambient air temperature for storage -25…70 °C pollution degree <= 2 Operating altitude 0...2000 m Storage altitude 0…3000 m Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 9.388 cm Package 1 Width 13.744 cm Package 1 Length 18.809 cm Package 1 Weight 767.5 g Unit Type of Package 2 S03 Number of Units in Package 2 12 Package 2 Height 30 cm Package 2 Width 30 cm Package 2 Length 40 cm Package 2 Weight 9716 g Unit Type of Package 3 P12 Number of Units in Package 3 288 Package 3 Height 95 cm Package 3 Width 80 cm Package 3 Length 120 cm Package 3 Weight 242184 g

This product is part of the Easy modicon M200 range, an offer of logic controllers for up to 168 I/O, 2 axis motion control. This logic controller provides 4 fast inputs, 4 high speed inputs, 16 regular inputs and 16 relay outputs, normally opened relay output. It is a Modicon logic controller with an input voltage of 24V DC, a discrete output voltage of 24V DC, 220V AC and an output current of 2A. Easy to maintain and update with its micro SD memory card. Integrated connections are mini B USB 2.0, non isolated serial link 1 and RS485, non isolated serial link 2 and RS232/RS485, and isolated serial link 2 and RS485. It is a controller with an internal flash of 512byte and a micro SD card capacity of 32GB. It is an IP20 rated product. Its dimensions are 175mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.504kg. Designed for textile, machine tool, packaging, material handling, pumping, hoisting, electronic assembly machines. This product is certified by CE, CSA, IACS E10, RCM and CULus. It meets EN/IEC 61010-2-201 and EN/IEC 61131-2 standards. It supports DIN rail mount. Entry-level plc perfectly suited to meet specific needs of emerging markets at an affordable price without compromise. Best performance/price ratio solutions for your small automation systems requiring flexibility and simple motion.

Login

TM200C40R SCHNEIDER ELECTRIC PLC

0%

0%

0%

0%

0%

Graven Automation Pvt Ltd