AAO810 ABB CONTRACTOR

In Stock

HURRY UP! Only 10 Products Left

$63163

$37897

40% OFF

1

Description Specification Reviews
     

0%

    0
     

0%

    0
     

0%

    0
     

0%

    0
     

0%

    0

Write Review


NO REVIEWS YET!

General info Article number 3BSE038415R1 Type Analog Output Signal specification 0..20 mA
4..20 mA Number of channels 8 HART No SOE No Redundancy No High integrity No Intrinsic safety No Mechanics S800 Detailed data Resolution 14 bit Isolation Groupwise isolated from ground Under/over range - / +15% Output load ? 500 ? (supply connected to L1+ only) 250 - 850 ? (with supply connected L2+ only) Error Max. 0.1% at 0 - 500 ohms (current) Temperature drift Typ. 30 ppm/°C
Max 60 ppm/°C Rise Time 0.35 ms (PL = 500 ?) Update cycle time ? 2ms Current limiting Short circuit proof current limited output Maximum field cable length 600 meters (656 yards) Rated insulation voltage 50 V Dielectric test voltage 500 V a.c. Power dissipation 2.3 W Current consumption +5 V Modulebus Max 70 mA Current consumption +24 V Modulebus 0 Current consumption +24 V external 245 mA Diagnostics Front LED’s F(ault)
R(un)
W(arning)
O(SP) Supervision Module Error Output power low. Channel Error
Module Warning
Channel Error Environment and certification CE mark Yes Electrical safety EN 61010-1
UL 61010-1
EN 61010-2-201
UL 61010-2-201 Hazardous Location C1 Div 2 cULus
C1 Zone 2 cULus
ATEX Zone 2 Marine certification ABS
BV
DNV
LR Temperature
Operating 0 to +55 °C (+32 to +131 °F)
approvals are issued for +5 to +55 °C Temperature
Storage -40 to +70 °C (-40 to +158 °F) Pollution degree Degree 2
IEC 60664-1 Corrosion protection ISA-S71.04 G3 Relative humidity 5 to 95 %
non-condensing Max ambient temperature 55 °C (131 °F)
for vertical mounting in compact MTU 40 °C (104 °F) Protection class IP20 according to IEC 60529 Mechanical operating conditions IEC/EN 61131-2 EMC EN 61000-6-4 and EN 61000-6-2 Overvoltage categories IEC/EN 60664-1
EN 50178 Equipment class Class I according to IEC 61140; (earth protected) RoHS compliance DIRECTIVE/2011/65/EU (EN 505812012) WEEE compliance DIRECTIVE/2012/19/EU Compatibility Use with MTU TU810
TU812
TU814
TU830
TU833 Keying code AE Dimensions Width 45 mm (1.77”) Depth 102 mm (4.01”)
111 mm (4.37”) including connector Height 119 mm (4.7”) Weight 0.18 kg (0.4 lbs.)

The AO810/AO810V2 Analog Output Module has 8 unipolar analog output channels. To supervise the communication to the D/A-converters the serial data is read back and verified. The opencircuit diagnostic is received during the readback. The module performs self-diagnostic cyclically. The module diagnostics includes process power supply supervision, which is reported when supply voltage to output circuitry is to low. The error is reported as a channel error. The channel diagnostic includes fault detection of the channel (only reported on active channels). The error is reported if the output current is less than the output set value and the output set value is greater than 1 mA.

More FROM    

Graven Automation Pvt Ltd