HMISCU8B5 Schneider Electric

Range of product Harmony SCU Product or component type Small touch HMI controller Display size 5.7 inch Display type with backlit LED colour TFT LCD Touch panel Analogue Device presentation Complete product Complementary Display resolution 320 x 240 pixels QVGA Backlight lifespan 50000 hours with 65000 colours Brightness 16 levels via touch panel View angle horiz x vert 60° left 60° right 40° top 60° bottom Character font Chinese (simplified Chinese) Japanese (ANK
Kanji) ASCII Korean Taiwanese (traditional Chinese) Supply External source [Us] rated supply voltage 24 V (20.4…28.8 V)DC Immunity to microbreaks 10 ms Inrush current 30 A Power consumption in W 24 W Local signalling No indicator Number of pages Limited by internal memory capacity Software designation SoMachine Operating system Harmony Processor name CPU RISC Processor frequency 333 MHz Memory description Flash NAND
128 MB Internal data storage FRAM
128 kB Application run DRAM
128 MB Integrated connection type 1 serial link - RJ45 - RS232/RS485 (rate	<= 115.2 kbits/s) 1 Ethernet TCP/IP - RJ45 1 USB 2.0 type mini B 1 USB 2.0 type A CANopen master bus - SUB-D 9 Realtime clock Built-in Downloadable protocols Modbus Modbus TCP/IP CANopen Fixing mode By 1 nut - diameter
mounting on	1...6 mm thick panel Enclosure material PC/PBT and PAA Shock resistance 147 m/s² for 11 ms (on DIN rail) conforming to IEC 60068-2-27 294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27 Vibration resistance +/- 3.5 mm (f = 5…9 Hz) conforming to IEC 60068-2-6 1 gn (f = 9…150 Hz) conforming to IEC 60068-2-6 Electromagnetic compatibility Electrostatic discharge immunity test - test level
discrete input logic	sink or source (positive/negative) Number of common point 1 for fast input (HSC mode) 1 for digital input Discrete input current 7.83 mA for fast input 5 mA for digital Input impedance 4.7 kOhm 2.81 kOhm Sensor power supply 15…28.8 V DC >= 15 V
current (state 1)	>= 5 mA <= 5 V
current (state 0)	<= 1.5 mA 15…28.8 V DC >= 15 V
current (state 1)	>= 2.5 mA <= 5 V
current (state 0)	<= 1 mA Configurable filtering time 0 ms no filter (none) 0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2)) 3...12 ms integrator (none/run/stop) Maximum input frequency 100 kHz for fast input (encoder mode) - control type A/B 100 kHz for fast input - control type single phase 100 kHz for fast input - control type pulse/direction Maximum cable distance between devices Shielded cable
output logic	source 6 digital output
output logic	source Discrete output voltage 24 V DC (voltage limit
terminal(s)	FI0...FI1 2 for fast output
terminal(s)	FQ0...FQ1 6 for digital input
terminal(s)	DI0...DI5 6 for digital output
terminal(s)	DQ0...DQ5 Discrete output current 2 A 4 A)
response time 5 ms with opening contact for digital output 2 A 4 A)
response time 2 ms with closing contact for digital output 300 mA
response time 2 ms for fast output (normal mode) 50 mA
response time 2 ms for fast output (PWM or PTO mode) Insulation resistance > 10 MOhm between the I/O and internal logic > 10 MOhm between power supply and earth Maximum output frequency 100 kHz for fast output (PTO mode) 1 kHz for fast output (PWM mode) Absolute accuracy error +/- 0.1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode) 1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode) +/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode) +/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode) +/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode) Analogue input number 2 for analog input 2 for RTDs Analogue input range 0...20 mA/4...20 mA - resolution	12 bits
input impedance	250 Ohm (tolerance
input impedance	>= 1 MOhm Analogue input type RTD at - 200...600 °C - resolution

This Magelis SCU small touchscreen operator interface controller (HMI) is supplied with 24V DC, has a 5.7" color TFT LCD display and 128MB EPROM. It also has 8 digital inputs, 8 digital outputs, 4 analog inputs, 2 analog outputs, 1 host + 1 mini-B USB ports, 1 RS232C / RS485 port and 1 CANopen port. It is ideal for optimized information and communication with automation systems in industry and infrastructure such as compact machines, handling systems, food & beverage machines and pharmaceutical industry. The screen displays text messages, graphic objects and mimic diagrams, control and configuration of data. Its RS485 and CANopen host ports make it ideal to supervise and control simple systems and machines. Its multiple I/O, including high speed counters, allowing you to processes with fast sensing chains.

Login

HMISCU8B5 Schneider Electric

0%

0%

0%

0%

0%

Graven Automation Pvt Ltd