ATV320U15M2B Schneider Electric

Range of Product Altivar Machine ATV320 Product or Component Type Variable speed drive Product Specific Application Complex machines Variant Standard version Format of the drive Book Mounting Mode Cabinet mount Communication Port Protocol Modbus serial CANopen Option card communication module
CANopen communication module
EtherCAT communication module
Profibus DP V1 communication module
PROFINET communication module
Ethernet Powerlink communication module
EtherNet/IP communication module
DeviceNet [Us] rated supply voltage 200...240 V - 15...10 % nominal output current 8.0 A Motor power kW 1.5 kW heavy duty EMC filter Class C2 EMC filter integrated IP degree of protection IP20 Complementary Discrete input number 7 Discrete input type STO safe torque off
24 V DC1.5 kOhm DI1...DI6 logic inputs
24 V DC 30 V) DI5 programmable as pulse input 0…30 kHz
24 V DC 30 V) Discrete input logic Positive logic (source) Negative logic (sink) Discrete output number 3 Discrete output type Open collector DQ+ 0…1 kHz 30 V DC 100 mA Open collector DQ- 0…1 kHz 30 V DC 100 mA Analogue input number 3 Analogue input type AI1 voltage 0...10 V DC 30 kOhm 10 bits AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits AI3 current 0...20 mA (or 4-20 mA
x-20 mA
20-x mA or other patterns by configuration) 250 Ohm 10 bits Analogue output number 1 Analogue output type Software-configurable current AQ1 0...20 mA 800 Ohm 10 bits Software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits Relay output type Configurable relay logic R1A 1 NO 100000 cycles Configurable relay logic R1B 1 NC 100000 cycles Configurable relay logic R1C Configurable relay logic R2A 1 NO 100000 cycles Configurable relay logic R2C Maximum switching current Relay output R1A
R1B
R1C resistive
cos phi = 1 3 A 250 V AC Relay output R1A
R1B
R1C resistive
cos phi = 1 3 A 30 V DC Relay output R1A
R1B
R1C
R2A
R2C inductive
cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1A
R1B
R1C
R2A
R2C inductive
cos phi = 0.4 7 ms 2 A 30 V DC Relay output R2A
R2C resistive
cos phi = 1 5 A 250 V AC Relay output R2A
R2C resistive
cos phi = 1 5 A 30 V DC Minimum switching current Relay output R1A
R1B
R1C
R2A
R2C 5 mA 24 V DC Method of access Slave CANopen 4 quadrant operation possible True Asynchronous motor control profile Voltage/frequency ratio
5 points Flux vector control without sensor
standard Voltage/frequency ratio - Energy Saving
quadratic U/f Flux vector control without sensor - Energy Saving Voltage/frequency ratio
2 points Synchronous motor control profile Vector control without sensor Maximum output frequency 0.599 kHz Acceleration and deceleration ramps Linear U S CUS Ramp switching Acceleration/deceleration ramp adaptation Acceleration/deceleration automatic stop with DC injection Motor slip compensation Automatic whatever the load Adjustable 0...300 % Not available in voltage/frequency ratio (2 or 5 points) Switching frequency 2...16 kHz adjustable 4...16 kHz with derating factor Nominal switching frequency 4 kHz Braking to standstill By DC injection Brake chopper integrated True Line current 17.6 A 200 V heavy duty) 14.8 A 240 V heavy duty) Maximum Input Current per Phase 17.6 A Maximum output voltage 240 V Apparent power 3.6 kVA 240 V heavy duty) Network Frequency 50-60 Hz Relative symmetric network frequency tolerance 5 % Prospective line Isc 1 kA Base load current at high overload 3.7 A Power dissipation in W Fan 77.0 W 200 V 4 kHz With safety function Safely Limited Speed (SLS) True With safety function Safe brake management (SBC/SBT) False With safety function Safe Operating Stop (SOS) False With safety function Safe Position (SP) False With safety function Safe programmable logic False With safety function Safe Speed Monitor (SSM) False With safety function Safe Stop 1 (SS1) True With sft fct Safe Stop 2 (SS2) False With safety function Safe torque off (STO) True With safety function Safely Limited Position (SLP) False With safety function Safe Direction (SDI) False Protection type Input phase breaks drive Overcurrent between output phases and earth drive Overheating protection drive Short-circuit between motor phases drive Thermal protection drive Width 2.4 in (60 mm) Height 12.8 in (325.0 mm) Depth 9.6 in (245.0 mm) Product Weight 6.4 lb(US) (2.9 kg) Transient overtorque 170…200 % of nominal motor torque Environment Operating position Vertical +/- 10 degree Product Certifications CE ATEX NOM GOST EAC RCM KC Marking CE ATEX UL CSA EAC RCM Standards IEC 61800-5-1 Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 Environmental class (during operation) Class 3C3 according to IEC 60721-3-3 Class 3S2 according to IEC 60721-3-3 Maximum acceleration under shock impact (during operation) 150 m/s² at 11 ms Maximum acceleration under vibrational stress (during operation) 10 m/s² at 13...200 Hz Maximum deflection under vibratory load (during operation) 1.5 mm at 2...13 Hz Permitted relative humidity (during operation) Class 3K5 according to EN 60721-3 Volume of cooling air 2985.2 Gal/hr(US) (11.3 m3/h) Overvoltage category III Regulation loop Adjustable PID regulator Speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn pollution degree 2 Ambient air transport temperature -13…158 °F (-25…70 °C) Ambient air temperature for operation 14…122 °F (-10…50 °C) without derating 122…140 °F (50…60 °C) with derating factor Ambient Air Temperature for Storage -13…158 °F (-25…70 °C) Ordering and shipping details Category US1CP4B22152 Discount Schedule CP4B GTIN 3606480966361 Returnability Yes Country of origin ID Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 3.78 in (9.600 cm) Package 1 Width 10.83 in (27.500 cm) Package 1 Length 12.80 in (32.500 cm) Package 1 Weight 5.789 lb(US) (2.626 kg) Unit Type of Package 2 P06 Number of Units in Package 2 20 Package 2 Height 29.53 in (75.000 cm) Package 2 Width 23.62 in (60.000 cm) Package 2 Length 31.50 in (80.000 cm) Package 2 Weight 152.560 lb(US) (69.200 kg)

This Altivar 320 variable speed drive can feed three-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 1.5kW / 2hp and a rated voltage from 200V to 240V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

Login

ATV320U15M2B Schneider Electric

0%

0%

0%

0%

0%

Graven Automation Pvt Ltd